Cutting Tool Life
MECHANICAL NOTES
PRODUCTION ENGINEERING
TOOL LIFE: The tool life may be defined as tool's useful life
formula to calculate tool life is given below
(V Tn =C)
V= velocity of the cutting tool (m/min)
T= tool life(min)
C= constant
n= An exponent, which depends upon the tool and work piece
= 0.1 to 0.2 for high speed steel tools
=0.2 to 0.25 for for carbide tools
=0.4 to 0.55 for ceramic tools
TOOL LIFE: according to the material of the cutting tool
CERAMIC > CARBIDE > HIGH SPEED STEEL TOOL > HIGH CARBON STEEL TOOL
Subscribe to:
Posts (Atom)
-
Introduction: The radial or separating force tends to force the worm and worm gear out of mesh. This force also bends the worm in the v... -
Introduction: Bevel Gears include Pitch cone, Pitch angle., Addendum angle etc. Terms used in bevel gears: Terms used in bevel ... -
Introduction: The involute teeth for a spur gear may be generated by the edge of a plane as it rolls on a base cylinder. Tredgold’s Ap...